R-Hopped Modify Hybrid 6.03mm Tightbore barrel Flat-Hop Bucking S-Nub AEG RHop

Description

Features:
R-Hopped
Modify Hybrid 6.03mm Tightbore Barrel
·
R-Hop is the single most important part in airsoft that extends your effective range to over
60m/200ft
. Max range of
90m/300ft
can be achieved
(with M130 spring, 1.7J).
·
Modify Hybrid 6.03mm Tightbore Barrel is made of Stainless Steel + Aircraft Aluminum Alloy.
·
These barrels are extremely straight with high rigidity. 2 O-Rings are included to reduce barrel vibration.
·
4 Lengths to choose from: 285mm, 363mm, 407mm & 455mm.
·
A R-Hop is already glued to the barrel. If you would like to glue it yourself, please let us know.
·
An
EXTRA R-Hop
is also included, in case the first one is damaged.
·
Please make sure of the right length for your airsoft replica. We do not accept returns if wrong lengths were selected.
·
IMPORTANT! Please note that due to the steel + aluminum structure, there are more occasional “flyer BBs”, compared to other one-piece TBB.
·
Traditional R-
Hops are 1.5mm thick and airsoft barrels are 1.25mm thick. Thus, sanding is required. Our R-Hops are
Exactly 1.25mm thick
. Therefore,
NO SANDING is required
.
·
Cold weather resistant
.
·
The barrel also Comes with 2X O-Rings + 1X Normal AEG Hop-Up Bucking.
Flat-Hop Bucking
·
Modify
®
Baton Flat-Hop Bucking (Hard Type
for better air seal) is a perfect match for R-Hop.
S-Nub
·
We have developed the S-Nubs (Silicone-Nub). Like our R-Hops, they are made
specifically
for certain hopups
. They just fit and require
zero cutting
. Moreover,
you don't need to flatten the hop arm
.
·
R-Hop is extremely effective at hopping BBs. So normal nubs are usually too thick for R-Hop, and will result in overhopping even if the hop-dial is at zero.
·
Krytac
®
Prowin
®
Prommy
®
, and Madbull
®
hopups will constantly overhop if the nub is thicker than 1.5mm. VFC
®
& Lonex
®
hopups require 0.8mm nubs for R-Hopping.
·
Thus, the thickness of S-Nub for
Krytac
®
Prowin
®
Prommy
®
, and Madbull
®
is 1.25mm. The "sweet point" is around half at the hop-dial. S-Nub for
VFC
®
& Lonex
®
is 0.8mm thick.
·
To use the S-nub, simply remove the stock nub, and drop in the S-Nub. Only 1 piece is needed.
·
S-Nubs are Concave-shaped, thus are best-suited to the R-Hops.
·
FYI, thickness of M-Nub=3mm. Thus, it will overhop unless you flatten the hop arm.
Same Business Day Free Shipping from
U
S
A
.
We ship
7 days/week
, yes, including
Sat & Sun
.