Aquasport 170 Badges / Emblems

Description

Aquasport Badges / Emblems are CNC machined from 1/4" Green/White/Green King ColorCore®. Approximate overall size is 4-3/8" x 17-5/8. King ColorCore® has a matte finish on both sides of the sheet. It is environmentally stabilized to withstand the harshest outdoor conditions. King ColorCore® will not rust, delaminate or rot when exposed to UV, humidity or water. King ColorCore® is made with high-impact-resistant polymer to handle more abuse than conventional sign material.
This is for a pair (2) badges/emblems.
Each set of badges/emblems are custom CNC machined per order as there are too many models to keep in stock.
If you do not see your model listed, send me a message as I can create it.
Fastening to Boat
Clean area well to remove wax and apply blue painter tape to use for aligning the badge/emblem in the proper spot.
Apply dabs of 5200 or similar marine adhesive to the back side of badge/emblem
The dabs should be the size of a grain of rice, using a toothpick to cover most of the surface
Press the badge/emblem into place and hold it there with some blue painters tape.
WAIT a few days (48 hours) for the adhesive to harden
Using a very sharp knife cut any "squeeze out"
Remove any painters tape